Are you looking to personalize your Audi S4 and unlock features you didn’t even know existed? Modern Audis, especially the S4 models, are packed with customizable options that can be activated or deactivated through coding. Using tools like Carly or VCDS (VAG-COM), you can tap into your car’s software and tailor it to your preferences. This guide provides a comprehensive Carly Audi Coding List and VCDS tweaks specifically for the Audi S4, letting you enhance your driving experience.
This list compiles popular and effective modifications gathered from Audi enthusiast communities, presented in one easy-to-follow document. Think of this as your go-to resource for taking control of your Audi S4’s functionality. Please remember, while these modifications are generally safe, proceed with caution and ensure you understand each step before making changes to your vehicle’s coding.
Here’s an extensive list of coding modifications you can explore for your Audi S4:
Enhance Your Audi S4 – Coding Options
This section details a range of coding options to customize various aspects of your Audi S4, from lighting and convenience features to performance displays and warnings.
Lighting Modifications
1. Disable After-wipe of Windscreen Wipers:
Eliminate that annoying extra wipe of your windscreen wipers a few seconds after using the washer fluid.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> [Dropdown] -> “x ** 8K1 955 119 ** WWS xxxx” -> Long Coding Helper -> Byte 1 Bit 3 – Remove check mark (1 = active)
2. Disable Amber Corner Lights (for US Models):
Clean up the look of your headlights by disabling the amber corner lights, often preferred for a more streamlined appearance.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 10 Submodule 0 Bit 3 – Set to 0 to disable amber side markers (U.S. vehicles)
3. Disable Amber Side Markers:
Similar to corner lights, disable the amber side marker lights for a cleaner side profile.
- VCDS Code: (Covered in “Disable Amber Corner Lights” – often controlled together)
4. Disable LED ‘wink’ on Turn Signal:
Some find the dimming or ‘wink’ of the LED daytime running lights (DRLs) when the turn signal is activated to be undesirable. Disable this for constant DRL brightness.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 3 Bit 2 – LEDs remain at full brightness with parking lights (1 = active). Note: Bit 7 controls turning off LED-strip DRLs with indicators.
5. Enable DRL Selectable via MMI:
Gain control over your Daytime Running Lights through your car’s Multi Media Interface (MMI) system, allowing you to easily turn them on or off as desired via the car menu.
- VCDS Code: [09 – Cent. Elect.] -> [Coding – 07] -> Long Coding Helper -> Byte 3 Bit 5 set to 1
6. Enable DRL (Daytime Running Lights) – Multiple Configurations:
Customize which lights function as your DRLs. Options include front side markers, high beams, fog lights, LEDs, and tail lights.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2 Bit 1 = DRL via Front Side markers; Bit 2 = DRL via High Beams; Bit 3 = DRL via Fogs; Bit 4 = DRL via LEDs; Bit 6 = DRL via Side markers; Bit 7 = DRL via Tail lights
7. Enable Euro Parking Lights:
Activate the European-style parking lights where the signal light on the side of the turned steering wheel illuminates at night when parking.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 9 Bit 0 – Set to 1
8. Enable Fog Lamp as Cornering Lights:
Program your fog lights to activate on the same side as your turn signal, providing enhanced visibility when turning at night.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4 Bit 0 – Check the box or change :Bit 0 set to 1
9. Enable Front Turn Signals as Parking Lights:
Have your front turn signals function as additional parking lights for increased visibility.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 10 Bit 0- Check the box or change :Bit 0 to 1. For DRL function with front turn signals: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2 Bit 6 – Check the box or change :Bit 0 set to 1
10. Enable LEDs Remain Bright for Parking Lights:
Ensure your LED lights maintain full brightness even when used as parking lights, enhancing their visual impact.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 3 Bit 2 – LEDs remain at full brightness with parking lights (1 = active)
11. Enable Rear Tail Lights on with DRLs:
Increase your vehicle’s visibility by having the rear tail lights illuminate whenever the Daytime Running Lights are active.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2 Bit 7 – DRL’s via Tail Lights Active (1 = Active)
12. Adjust LED Brightness:
Fine-tune the brightness of your LED lights to your preferred level.
- VCDS Code: [09 – Cent. Elect.] [Security Access – 16] (enter security code – default is often 20113) [Adaptation – 10] -> Channel 3 Set between 5 and 100
Convenience and Warning Modifications
13. Disable Key Warning (Keyless Models):
Stop the annoying key warning chime when you open the door in keyless models while the ignition is off.
- VCDS Code: [46 – Central Conv.] [Coding – 07] -> Long Coding Helper -> Byte 9 Bit 7 set to 0 (Uncheck)
14. Disable “Lights are on” Warning:
Silence the “lights are on” warning chime when you open the door after turning off the engine but forgetting to switch off the headlights.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 5 Bit 3 – Set to 0 to disable “lights are on” warning when you open the door.
15. Disable NAV & Phone Warning Messages at Speed:
Remove the annoying safety warnings that appear on your navigation or phone interface when entering data while the car is in motion.
- VCDS Code: [5F – Information Electr.] -> Adaptation -> Set channel 2 & 3 to 250
16. Disable Seatbelt Chime:
Deactivate the seatbelt warning chime. Note: Disabling safety features is done at your own risk and is not recommended for road safety.
- VCDS Code: [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 0 Bit 2-4 – Seat Belt Warning inactive
17. Enable Double Disarm Beep:
Get audible confirmation when disarming your alarm system with a double beep.
- VCDS Code: [46 – Central Conv.] [Adaptation – 10] -> Channel 63 Add 4
18. Enable Release Parking Brake without Foot on Brake:
Disengage the electronic parking brake without needing to press the brake pedal.
- VCDS Code: [53 – Parking Brake][Security Access – 16] (Enter code presented by program) [Adaptation – 10] -> Channel 4 Set to 0
19. Enable Release Parking Brake without Seatbelt:
Allow release of the parking brake even if the driver’s seatbelt is not fastened.
- VCDS Code: [53 – Parking Brake][Security Access – 16] (Enter code presented by program) [Adaptation – 10] -> Channel 7 Set to 0
20. Enable Remote Operation Windows & Sunroof:
Control your windows and sunroof remotely using your key fob for added convenience, especially on hot days to vent the car before entering.
- VCDS Code: [46 – Cent. Conv.] [Coding – 07] -> [Long Coding Helper] Byte 2 Bit 2 – Set to 1
21. Set Audi Parking System – Switch OFF Speed:
Adjust the speed threshold at which the Audi parking system deactivates, allowing it to remain active at slightly higher speeds if desired.
- VCDS Code: [10 – Park/Steer Assist] [Adaptation – 10] -> Channel 23 Set to 20 (max value in km/h)
22. Set Headlight Washer – Cycles & Duration:
Customize the number of cycles and duration of your headlight washers to optimize cleaning and fluid usage.
- Headlight Washer Duration: [09 – Cent. Elect.] [Security Access – 16] [Adaptation – 10] -> Channel 6 change to e.g. 500
- Headlight Washer Cycles: [09 – Cent. Elect.] [Security Access – 16] [Adaptation – 10] -> Channel 26 change to e.g. 10
Performance and Display Modifications
23. Enable Adaptive Brake Lights:
Activate the adaptive brake lights feature, which makes your brake lights or turn signals flash rapidly during hard braking to warn drivers behind you more effectively.
- VCDS Code: [46 – Comfort System] [Coding – 07] -> Long Coding Helper -> Byte 8 Bit 0 – Emergency Brake Flashing via Turn Lights active (1 = active); Bit 1 – Emergency Brake Flashing via Brake Lights active (1 = active)
24. Enable Automatic Gear Selection Shown in DIS:
Display the current automatic gear selection (D or S) in your Driver Information System (DIS) for clearer driving information.
- VCDS Code: [02 – Auto Trans] [Adaptation – 10] Select “Single Gear Display” from top channel drop down menu; Select “D on/S on” from New value drop down menu
25. Enable Automatic Hill Hold Assist ‘lite’:
Activate a ‘lite’ version of hill hold assist for smoother starts on inclines.
- VCDS Code: [03 – ABS brakes][Security Access – 16] (Enter code presented by program) [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 6 set to 1 to enable hill hold assist.
26. Enable Battery Meter:
Display a battery meter in your MMI or radio system to monitor your car battery’s voltage.
- MMI Method: [Hidden menu] [car] [cardevextdevicelist] [Battery] Enable; [Hidden menu] [car] [carmenuoperation] [Battery] Set to 5; Reset MMI
- Radio Method: [56 – Radio] -> Adaption -> Channel 39, add 16 to your value
27. Enable DIS with Efficiency Program (MY2010+):
For models from 2010 onwards, enable the Efficiency Program within the DIS, providing driving efficiency tips. Note: May not be a complete program without Start/Stop System.
- VCDS Code: [17 – Instruments] [Adaptation – 10] -> Channel 77 change 0 to 255
28. Enable Gauge Test/Needle Sweep:
Enjoy the visual flourish of a gauge test or needle sweep upon starting your car, where the instrument needles sweep across the gauges and back.
- VCDS Code: [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 0 – Check the box for “Gauge Test/Needle Sweep active”
29. Enable Lap Timer:
Unlock the lap timer function in your DIS, useful for track days or performance testing.
- VCDS Code: [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 3 – Check the box for “Lap Timer active”
30. Enable Speed Through MMI:
Display your vehicle speed digitally within the MMI system. Note: May not work on models equipped with Navigation.
- VCDS Code: [56 – Radio] [Adaptation – 10] -> Channel 02, Set to 1. Does not work if NAV equipped.
31. Adjust Consumption in DIS:
Calibrate the fuel consumption displayed in your DIS to match real-world figures more accurately.
- VCDS Code: [17 – Instruments] [Adaptation – 10] -> Channel 3 change 100 to xxx (adjust based on calculation examples provided in original article for accuracy).
32. Set Automatic Transmission Start Mode:
Customize the default start mode of your automatic transmission to D or S, or have it remember the last used mode based on your Audi Drive Select settings.
- VCDS Code: [09 – Cent. Elect.] [Security Access – 10] [Adaptation 10] -> Channel 64 (Various values available, see original article for options like ‘always S’, ‘always D’, or ‘ADS dependent’)
Advanced Modifications (Use with Caution)
33. Enable Ambient Interior Lighting Control:
Gain control over ambient interior lighting settings, often requiring activation in hidden menus and MMI reset.
- VCDS Code & Steps: [Hidden menu] [car] [carmenuoperation] [interior light] Set to 5; [Hidden menu] [car] [cardevicelist] [interior light] Enable; Reset MMI
34. Enable Auxiliary Ventilation:
Activate auxiliary ventilation features, potentially requiring hidden menu access and HVAC coding.
- VCDS Code & Steps: [5F – Information Electr.] [Coding – 07] -> Long Coding Helper -> Byte 6 Bit 1 – Set to 1; [Hidden menu] [car] [cardevicelist] [Auxiliary heating] Enable; [08 – Auto HVAC] [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 3 – Set to 1; Bit 4 – Set to 1
35. Enable Hidden Menu in MMI:
Access the hidden menu in your MMI system for advanced settings and diagnostics. Use with extreme caution, incorrect settings can cause issues. Avoid the “Bootloader” menu.
- VCDS Code: [5F – Information Electr.] [Adaptation – 10] -> Channel 6 change 0 to 1
36. Enable Import CDs to MMI’s HD:
Enable the function to import CDs directly to your MMI’s hard drive for digital music storage.
- MMI Menu: [Hidden menu] Main/Diagnose/Settings Import Media Set to 4 of 4 “Copy/Ripping”
37. Enable Independent Fogs Control with High Beams:
Allow your fog lights to remain on even when high beams are activated, for maximum illumination in certain conditions.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4 Bit 1 – (Front) Uncheck the box or change :Bit 1 to 0; Bit 2 – (Rear) Uncheck the box or change :Bit 2 to 0
38. Enable Reverse Mirror Tilt:
Program the passenger side mirror to tilt downwards when reversing, improving visibility of curbs and obstacles.
- VCDS Code: [52 Door Elect, Pass.] -> [Coding – 07] -> [Long Coding Helper] -> Byte 4 Bit 4 and Bit 2 set to 1
39. Enable TPMS (Tire Pressure Monitoring System):
Activate the Tire Pressure Monitoring System if your car has the necessary hardware (1AT ABS unit). Requires multiple coding steps in ABS Brakes and Instrument Cluster modules, and enabling via hidden menu.
- VCDS Code & Steps: [Hidden menu] [car] [cardevicelist] [RDK] Enable; [Hidden menu] [car] [carmenuoperation] [Tires Air Pressure Control] Set to 5; [03 – ABS Brakes] [Security Access – 16] (login code: 61378) [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 3 – Tire Pressure Monitoring (PR-7K6) active (1 = active); [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 4 Bit 0 – Tire Pressure Monitoring (TPMS) installed (1 = active); Reset MMI
40. Enable VIM (Video In Motion) on MMI:
Unlock the Video In Motion feature, allowing video playback on your MMI screen while the car is moving. Check local laws regarding video playback while driving. Use responsibly.
- VCDS Code & Steps: [5F – Information Electr.] [Advanced ID – 1A] Note 1st Serial number; [Security Access] Enter Digits 6, 13, 10, 14, 11 of the 1st Serial number; [Adaptation – 10] -> Channel 48 Set to 255; Reset MMI
41. Set Custom ADS (Audi Drive Select) Settings:
Customize the default Audi Drive Select mode (Comfort, Auto, Dynamic, or Individual) for engine start-up.
- VCDS Code: [09 – Cent. Elect.][Security Access – 16] [Adaptation – 10] -> Channel 63, 64, 65, 66. Set all four channels to the desired mode value: 01 – Comfort, 02 – Auto, 03 – Dynamic, or 04 – Individual. Note: all four channels need to be set to the same value.
42. Enable Headlights on all the time:
Force your headlights to be always on, regardless of light conditions.
- VCDS Code: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4 Bit 5 – Check the box or change :(Bit 5 Set to 1)
Important Considerations Before Coding
- Disclaimer: Modifications are performed at your own risk. Incorrect coding can lead to vehicle malfunctions.
- Backup: It is highly recommended to note down or backup your original coding settings before making any changes, so you can revert if needed.
- Tool Compatibility: Ensure your Carly adapter or VCDS cable and software are compatible with your Audi S4 B8 model year.
- Professional Help: If you are unsure about any coding steps, seek assistance from a qualified mechanic or Audi specialist familiar with VCDS or Carly coding.
This Carly Audi coding list and VCDS guide is designed to help you personalize your Audi S4. By exploring these options, you can tailor your car to better suit your needs and preferences, enhancing your overall ownership experience. Enjoy exploring the possibilities!
