Carly Coding Angel Eyes to Stay On as DRLs for BMW Z4: A DIY Guide

Dreaming of having your BMW Z4’s Angel Eyes shine brightly as Daytime Running Lights (DRLs)? Many BMW enthusiasts aim for this stylish modification. While Carly coding offers the tools to customize your BMW’s lighting, achieving “Carly Coding Angel Eyes Stay On” as DRLs isn’t always immediately obvious. This guide shares a detailed, first-hand experience of successfully setting up Angel Eyes as DRLs on a BMW Z4 using Carly, overcoming initial hurdles and specialist advice.

Initial Attempts and Professional Misconceptions

The journey began with seeking professional help. A local BMW specialist was consulted, hoping their expertise would quickly resolve the “carly coding angel eyes stay on” challenge. However, after an hour of investigation using their programming tools, the response was discouraging: “Can’t be done.” This initial setback highlights that even experienced professionals might not readily know the specific Carly coding steps for Angel Eyes DRLs.

DIY Approach with Carly: Navigating the Coding Options

Undeterred, the decision was made to take a DIY approach with the Carly app. Carly was already acquired for various BMW coding adjustments, making it the perfect tool for this task. Basic coding functions, like enabling indicator flashes for locking and unlocking the vehicle, and audible lock confirmations, were easily implemented.

The Headlight DRL Dilemma

The real challenge arose when attempting to activate Angel Eyes as DRLs. Carly’s interface suggests enabling “Daytime running lights 1/2” and “Daytime running lights 2/2”. Following this prompt, however, resulted in the headlights activating as DRLs – not the desired Angel Eyes. Further exploration of Carly’s lighting settings was needed.

Deciphering Carly’s “Standing Lights” Setting for Angel Eyes

Carly presented settings like “dipped main beams [disabled]”, “standing lights [disabled]”, and “Daytime running light brightness”. Experimentation revealed that “standing lights” actually controlled the side lights, where the Angel Eyes were wired in this particular setup. Adjusting “Daytime brightness” had no effect on the Angel Eyes, further adding to the confusion.

The Breakthrough: Disabling DRL Settings for Angel Eyes Success

Frustration led to a process of elimination. Intending to revert to the original settings, “Daytime running lights 1/2” and “Daytime running lights 2/2” were disabled. Crucially, “standing lights” was inadvertently left enabled. This accidental configuration proved to be the key.

Eureka! With the ignition on and light switch in the Auto or Off position, only the Angel Eyes illuminated as DRLs. This discovery contradicted Carly’s apparent instruction that “Both daytime running lights 1/2 and daytime running lights 2/2 must be enabled” for DRL functionality. This statement only holds true if headlights are intended as DRLs. For Angel Eyes (wired to side lights) to function as DRLs, these main DRL settings must be disabled, and “standing lights” enabled.

Conclusion

For BMW Z4 owners seeking to use “carly coding angel eyes stay on” as their Daytime Running Lights, remember this key takeaway: disable the main “Daytime running lights” settings in Carly and enable “standing lights”. Hopefully, this real-world experience saves you from months of head-scratching and allows you to enjoy the enhanced aesthetics of your Angel Eyes DRLs sooner.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *